Strong spatter-resistance for fixtures, tools, and jigs - safe and sustainable

Advantages

• Long-lasting protection agent
• Compliant with coatings of the parts (paint, galvanising etc.) for higher process safety
• Prevents sensor faults on jigs
• Non-flammable, safe for user and environment (see safety datasheet SDS)
• Used and approved in the automotive industry

Benefits, Results

• Minimises cleaning time for jigs and fixtures in welding and laser-cutting processes
• Increased productivity by safeguarding function
• Longer service life of jigs and fixtures resulted from reduced mechanical stress during cleaning

Application

Regularly coat jigs, welding fixtures and tools using Visco-Lotion PROTEC CE15V+.
The application intervals depend on the process environment and must be determined empirically. Re-apply after each cleaning process (e.g. dry ice cleaning).

Apply using the Pump-Sprayer PROTEC HSP4K-V or using PROTEC pressure sprayer to guarantee optimum coating and high efficiency.

Not suitable for welding over,  we recommend Metallotion PROTEC CE15L+ for spatter-protection of weld-parts).

Check material durability prior to first use (cables, sensors, etc.)
Shake before use.
Protect from frost.

Specifications

• Ingredient type: Oil in water emulsion
• Density (20°C): 0.98 g/ml
• Viscosity (20℃): 14 sec DIN 53211/4
• Flash point: n. a.
• pH value: 7,4
• Shelf life: At minimum 6 months
• Safety data sheet: Available at www.protec-austria.com
• 10 litre cannister, ID no. A016.010

Please contact us if you have any questions or want to test the Visco-Lotion PROTEC CE15V+ for welding fixtures or laser cutting machines.