|
WELDING WIRE BALM PROTEC WLS04 |
|
Contact spray, lubricant & cleaner for wire electrodes
Characteristics
- WELDING WIRE BALM PROTEC WLS04 is a contact lubricant to moisten wire electrodes before MAG-welding and MIG-brazing
- WLS04 removes grease, cleans and lubricates (minimum lubrication)
- Not adapted for ALUMINIUM !
Advantages
- WELDING WIRE BALM PROTEC WLS04 is tested and approved by well-known welding wire producers and users
- WLS04 guarantees highest process safety due to constant friction and constant resistance electricity transition
- WLS04 is a balm for dry and greasy wire electrodes
Customer Benefits
- Optimization of welding process
- Highest process safety
- Long life-time of contact nozzle and wire feed
Application
WELDING WIRE BALM PROTEC WLS04 is sprayed on a special felt pad which is fixed with a clip on the wire electrode (before wire inlet) WLS04 is applied once per shift (1 – 2 ccm)
ATTENTION
Prior to first application install a new liner !To remove dirt and possible balm surplus fix another dry felt pad after the lubricated pad (Tandem application)
Features
| Type of active substance: |
Hydrocarbon fluid with inhibitors |
| Density (20°C): |
0,88 g/ml |
|
|
| Viscosity (40°C): |
4,0 mm²/s |
|
| Flashpoint: |
> 100°C |
|
|
| Pour Point: |
7,1 |
 |
Safety Data Sheet |
| pH-value: |
n.a. |
www.protec-austria.com |
The chart below indicates the decrease of friction coefficient by using WELDING WIRE BALM PROTEC WLS 04.
The dark blue line shows the actual speed of wire without contact lubricant under speedometer steered drive (normal operation).The red line shows the decrease of friction coefficient by using WLS04.
Wire: Böhler EMK6-TIME 1,0mm<
Wirefeeder: ESAB ARISTO ROB LAL 500R MED 44R
|
Wire World 
